Parameters
Attention: When the MODBUS Master fieldbus configuration has been selected, the Property Enable TLS is available. Activate this option to use TLS encrypted communication. Otherwise all TLS configurations entered at the second level of the tree (like TLS) are ignored.
The following parameters can be configured for the fieldbus.
|
Parameter |
Description |
|
Mode |
Usage mode. Settings:
Default: Open MODBUS |
|
Address |
Address of the communication partner. Default: 127.0.0.1 |
|
Port |
Port number of the connection. Default: 502 |
|
Reconnect after error |
Defines, if automatically a reconnect will be started after an error. Default: activ |
|
Slave diagnostics |
Enables/disables the diagnostic mode of the slave. Default: activ |
|
Delay between requests (ms) |
Port number of the Ethernet connection. Default: 0 |
|
Description |
Freely editable text. Default: empty |
|
TLS |
Enables/disables secure communication.
Default: Disabled |
Parameters |
|
IEC 61131-3 Automation platform > Drivers - Fieldbus configuration > MODBUS Master > Fieldbus configuration > Settings in the fieldbus dialogs > Fieldbus configuration > Parameters |
|
|
Created with the Personal Edition of HelpNDoc: Maximize Your Documentation Efficiency with a Help Authoring Tool